Cadillac 2004 Seville Spécifications Page 297

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 410
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 296
Windshield Washer Fluid
What to Use
When you need windshield washer fluid, be sure to read
the manufacturer’s instructions before use. If you will
be operating your vehicle in an area where the
temperature may fall below freezing, use a fluid that has
sufficient protection against freezing.
Adding Washer Fluid
When your vehicle’s windshield washer fluid level
becomes low, a CHECK WASHER FLUID message will
appear on the Driver Information Center (DIC). You
will need to add fluid soon.
The windshield washer
fluid reservoir is located
next to the underhood fuse
block on the passenger’s
side of the vehicle.
See Engine Compartment Overview on page 5-12 for
reservoir location.
Open the cap with the washer symbol on it. Add washer
fluid until the tank is full.
Notice:
When using concentrated washer fluid, follow
the manufacturer’s instructions for adding
water.
Do not mix water with ready-to-use washer fluid.
Water can cause the solution to freeze and
damage your washer fluid tank and other parts
of the washer system. Also, water does not
clean as well as washer fluid.
Fill your washer fluid tank only three-quarters
full when it is very cold. This allows for
expansion if freezing occurs, which could
damage the tank if it is completely full.
Do not use engine coolant (antifreeze) in your
windshield washer. It can damage your washer
system and paint.
5-37
Vue de la page 296
1 2 ... 292 293 294 295 296 297 298 299 300 301 302 ... 409 410

Commentaires sur ces manuels

Pas de commentaire