Cadillac 2010 SRX Crossover Manuel d'utilisateur télécharger pdf (Page 401)

Vehicle Care 9-97

9. Raise the vehicle by turning the

wheel wrench clockwise until the

slots in the jack head fit into the

metal flange located behind the

triangle on the plastic moulding.

Notice: Using a jack to raise the

vehicle without positioning it

correctly could damage your

vehicle. When raising your

vehicle on a jack, be sure to

position it correctly under the

frame and avoid contact with the

plastic molding.

10. Put the compact spare tire

near you.

Remove all of the wheel nuts.

11. Remove the flat tire.

{

WARNING

Rust or dirt on a wheel, or on the

parts to which it is fastened, can

make wheel nuts become loose

after time. The wheel could come

off and cause an accident. When

changing a wheel, remove any

(Continued)

WARNING (Continued)

rust or dirt from places where the

wheel attaches to the vehicle. In

an emergency, use a cloth or a

paper towel to do this; but be sure

to use a scraper or wire brush

later, if needed, to get all the rust

or dirt off. See If a Tire Goes Flat

on page 9‑74

.

12. Remove any rust or dirt from

the wheel bolts, mounting

surfaces, and spare wheel.

1 2 ... 396 397 398 399 400 401 402 403 404 405 406 ... 469 470

Commentaires sur ces manuels

Pas de commentaire