Cadillac 2012 Escalade Manuel d'utilisateur télécharger pdf (Page 168)

Black plate (48,1)

Cadillac Escalade/Escalade ESV Owner Manual - 2012 - 2nd CRC - 11/29/11

5-48 Instruments and Controls

2. In the garage, locate the

garage door opener receiver

(motor-head unit). Find the

“Learn” or “Smart” button.

It can usually be found where

the hanging antenna wire is

attached to the motor-head unit

and may be a colored button.

Press this button. After pressing

this button, complete the

following steps in less than

30 seconds.

3. Immediately return to the

vehicle. Press and hold the

Universal Home Remote button

that will be used to control the

garage door until the garage

door moves. The indicator light,

above the selected button,

should slowly blink. This button

may need to be held for up to

20 seconds.

4. Immediately, within one second,

release the button when the

garage door moves. The

indicator light will blink rapidly

until programming is complete.

5. Press and release the same

button again. The garage door

should move, confirming that

programming is successful and

complete.

To program another Rolling Code

device such as an additional garage

door opener, a security device,

or home automation device, repeat

Steps 1 through 5, choosing a

different function button in Step 3

than what was used for the garage

door opener.

If these instructions do not work, the

garage door opener is probably a

Fixed Code unit. Follow the

programming instructions that follow

for a Fixed Code garage door

opener.

Programming Universal Home

Remote — Fixed Code

For questions or help programming

the Universal Home Remote

System, call 1-866-572-2728 or go

to www.learcar2u.com.

Most garage door openers sold

before 1996 are Fixed Code units.

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 537 538

Commentaires sur ces manuels

Pas de commentaire