Cadillac 2010 STS Manuel d'utilisateur télécharger pdf (Page 385)

100

101

Checking Coolant

The vehicle must be on a level surface when checking

the coolant level.

The coolant surge tank and pressure cap are located on

the driver's side of the vehicle, toward the rear of the

engine compartment. See Engine Compartment

Overview

on page 6‑13

for more information on

location.

Check to see if coolant is visible in the coolant surge

tank. If the coolant inside the coolant surge tank is

boiling, do not do anything else until it cools down.

If coolant is visible but the coolant level is not at or

above the FULL COLD/FROID line, add a 50/50 mixture

of clean, drinkable water and DEX-COOL

coolant at

the coolant surge tank, but be sure the cooling system

is cool before this is done.

When the engine is cold, the coolant level should be at

or above the FULL COLD/FROID line on the side of the

coolant surge tank. Follow the arrow from the top of the

tank down the side to the horizontal mark. If it is not,

there could be a leak in the cooling system.

If the coolant is low, add the coolant or take the vehicle

to a dealer/retailer for service

6-29

1 2 ... 380 381 382 383 384 385 386 387 388 389 390 ... 535 536

Commentaires sur ces manuels

Pas de commentaire

Cadillac 2010 STS Manuel d'utilisateur Page 385

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Cadillac 2010 STS