Cadillac 2001 Eldorado Manuel du propriétaire télécharger pdf (Page 100)

2-39

Setting Cruise Control

CAUTION:

If you leave your cruise control switch on when

you’re not using cruise, you might hit a button

and go into cruise when you don’t want to. You

could be startled and even lose control. Keep the

cruise control switch off until you want to use

cruise control.

1. Move the cruise control switch to ON.

2. Accelerate to the speed you want.

3. Press the SET CRUISE button at the end of the lever

and release it. The CRUISE ENGAGED message

will display on the Driver Information Center (DIC).

4. Remove your foot from the accelerator pedal.

Resuming a Set Speed

Setting the cruise control at a desired speed and then

applying the brake will end the cruise function.

Once you’re going about 25 mph (40 km/h) or more,

you can move the cruise control switch from ON to R/A

(Resume/Accelerate) for about half a second to reset.

This returns you to your desired preset speed. The

Driver Information Center (DIC) will display the

CRUISE ENGAGED message again.

If you hold the switch at R/A longer than half a second,

the vehicle will accelerate until you release the switch or

apply the brake. So unless you want to go faster, don’t

hold the switch at R/A.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 334 335

Pas de commentaire

Cadillac 2001 Eldorado Manuel du propriétaire Page 100